Efficient Dynamics BMW 5-Series ActiveHybrid Concept 2010

2010 BMW 5-Series ActiveHybrid Concept - wheel rims

A unique feature of energy management of the BMW 5-Series ActiveHybrid concept is the ability of the car to adjust the strategy and operations not only for the moment, but also driving conditions ahead. To do this, the power electronics to evaluate the preliminary data indicate the possibility of changes in external conditions or wishes driver and prepare elements in the powertrain and car electronic systems for the possibility of changing needs.
To analyze the driving conditions ahead, the system uses data provided by the engine and chassis, and sensor management in support of the system drivers on board. The data recorded in a navigation system on the route chosen by the same driver in the final calculation, which allows predictions on the road driving conditions ahead. Then, starting from this analysis, coordinated car in advance and optimize the use of all systems to use energy with maximum efficiency.

2010 BMW 5-Series ActiveHybrid Concept - body design

2010 BMW 5-Series ActiveHybrid Concept - engine design

2010 BMW 5-Series ActiveHybrid Concept - portal front

2010 BMW 5-Series ActiveHybrid Concept - price list

2010 BMW 5-Series ActiveHybrid Concept - rear design

If the system determines, for example, that the road ahead is to lead the descent, the battery charge level high voltage intelligently controlled in advance to return the braking energy with maximum efficiency early.
Similarly, a high voltage battery can be fully charged in time before the driver arrives at its destination, enabling the system to extinguish the combustion engine at an early stage and a change to electric traction systems along the last part of the road. Indeed, these statements are based on measures to extend the mileage on electric power up to 30%.
BMW 5-Series ActiveHybrid Concept: The Future of driveability and efficiency in the mid-range level.
Optimized for a higher level than the BMW 5 Series ActiveHybrid concept, the powertrain and control systems emphasize the importance of hybrid technology as the foundation of BMW EfficientDynamics. Watching a new generation hybrid technology found in the BMW 5 Series BMW ActiveHybrid Concept therefore offers very attractive prospects, the development of persistent BMW ActiveHybrid technology used to provide a significant progress in all areas to the concept of harmonious development of all-round feature special brand distinctive.
BMW 5-Series ActiveHybrid Concept is more dynamic, more efficient and more intelligent than classical representatives of this drive technology, clearly distinguishes itself as one of the BMW hybrid car in this segment.
BMW 5-Series ActiveHybrid Concept offers a successful interpretation of BMW 5 Series Sedan in all of the properties of dynamic, effective and innovative at the same time, sustainable development represents BMW X6 ActiveHybrid and 7 with BMW ActiveHybrid technology already in production training.
Drive system found in the BMW 5-Series ActiveHybrid Concept consists of a six-cylinder engine with a gasoline engine Twin Turbo Power technology, eight-speed automatic transmission and electric controls. BMW ActiveHybrid technology integration in an already very efficient sedan with a “conventional” internal combustion engine to reduce fuel consumption and emissions once again more than 10 percent. At the same time the electric motor provides functions to encourage, support the gasoline engine to produce power that is very dynamic impetus for sporting events and even more experience of driving in the car.
Intelligent Energy Management also serves to increase the efficiency of the entire system, a unique feature to ensure the control and management of all energy channels in the car and components interact appropriately tailored to the precise transmission of driving conditions.
Drivetrain technology featured in the BMW 5 Series ActiveHybrid concept allows all-electric, zero emission vehicle traffic in urban areas. At the same time a special hybrid based on the Auto Start Stop function provides additional efficiency by continuing with the combustion engine when stopped at traffic lights, crossing the road or in traffic. Comfort is optimized, ultimately, is provided by the climate control features help already present in 7 BMW ActiveHybrid.
Development of special ActiveHybrid technology within BMW EfficientDynamics.
Concept car based on the BMW 5 Series Sedan for the first time this next generation of BMW ActiveHybrid technology, BMW smart customized solutions exclusively for the interaction of the combustion engine and electric motor is specifically focused on the demands made of the dynamic sedan in mid-range level.
In adopting this approach, the BMW is still pursuing the development of hybrid technology on a modular principle (Best of Hybrid), providing optimum return on BMW ActiveHybrid technology for each concept and vehicle segment.
Under the BMW EfficientDynamics development strategy, which ensures high efficiency and practical use of hybrid technology to reduce fuel consumption and emissions.
Also at the BMW sedan segment: the BMW in the hybrid combines the highest dynamics with maximum efficiency.
Combustion engine is supported by the BMW 5-Series ActiveHybrid Concept by electric propulsion systems developed specifically for this model and arranged in a compact dimension in the six-cylinder internal combustion engine and automatic transmission. Drawing with power from high voltage battery in the back of the car, an electric motor develops maximum output of 40 kilowatts.
In the automatic clutch connects the gasoline engine and electric motor.
Because particularly high torque levels produced from scratch by an electric motor, the interaction of the two acceleration drive system ensures a very spontaneous and dynamic every time needed.
Fully integrated, controlled with good precision high voltage battery supplying electric motors and onboard network.
In the past, and applying the brakes, electric propulsion development to act as a generator of electricity supply high voltage battery. This can convert the kinetic energy lost as heat in the braking system into electrical energy is stored for later use.
Obtained without any additional energy such as fuel consumption can then be used to generate electricity to drive or use the functions in the car.
This principle is the same as Brake Energy Regeneration is applied in the production of the current BMW models, the level of electrical energy generated by electric motors is significantly higher and high efficiency.
High voltage battery is also developed for this specific concept is mounted in the special case of high resistance near the rear axle on the BMW 5-Series ActiveHybrid Concept. This leads to the optimal position in terms of safety and well-balanced weight distribution. An integrated control unit permanently load analysis of high battery voltage and controls the battery charging process either by way of Brake Energy Regeneration and cooling systems. Apart from electric motors, batteries provide high-voltage electricity from the car at the edge of the network. Among other things, this allows the efficient operation of climate control of the car is turned helpers whenever needed with the remote control functions to cool the interior significantly even before starting the engine.
Practical use of electricity all the drive-mode and Auto Start Stop is also guaranteed in this way, with all functions such as power audio systems, air navigation or remain fully available, even with the combustion engine off.
Single management: Intelligent Energy with the analysis before driving conditions.
BMW ActiveHybrid technology offers a unique potential in terms of efficiency and driving dynamics in all conditions and throughout a wide load range.
Unlike hybrid cars with the added efficiency is largely limited to urban traffic, both the BMW X6 ActiveHybrid and BMW 7 ActiveHybrid combines a combustion engine and electric motors can offer much lower fuel consumption and emissions ratings as at higher speeds. This is made possible by a sophisticated electronic interactions regulate the power of internal combustion engines and electric motors, thereby maximizing the overall efficiency of the overall drive system.
BMW 5-Series ActiveHybrid Concept raise more functions offered by the electronic power to a higher level. For example, the energy in the fuel supplied by high voltage battery can now be used even more specific and more effective to provide driving pleasure typical of BMW.
Taking into account other factors, the interaction of the two units of BMW 5-Series ActiveHybrid concept tailored to the needs of the driver and current driving conditions with maximum accuracy. At the same time the electronic power unit also controls the operation of additional cars and convenience functions, always in the interests of efficiency.
Range and diversity parameters calculated by the system really is quite unique in the car, as the number of functions that are controlled in this way. High levels around the network allows electronic energy resources to manage smart, and optimizing the operating strategy of the entire vehicle at all times.